Chenbro SK33502 Installation Guide with 3Gb/s SATA/SAS Backplane - Manual - Manual (Page 6)

6
SK33502 ver. B0
User’s Manual
www
.chenbr
o.com
15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,
Tel: +886 2 82265500 Fax: +886 2 82265392 Email: [email protected]
Getting Start with the SK33502 Storage Kit
Thank you for purchasing SK33502! This section covers unpacking and identifying components.
Unpacking and Checking the Contents
The complete SK33502 package includes the following items:
Item Description Quantity
SK33502 Storage Cage 1
Hot-swap 3.5” Hard Disk Drive (HDD) Tray 5
SAS / SATA-II Cable 5
HDD failure / activity signal cable 5P to 5P 1
USB Cable, 750mm 1
Screw: #6-32 (6mm) for tray and HDD assembling 20
Screw: M3 (6mm) for Storage Cage and chassis assembling 12
The 5P to 4P HDD failure / activity cable is available for using on HDD
failure or activity LED. Refer to the RAID card user manual for the
detailed application and connection information.
Technical Specifications
Occupancy 3 x 5.25” Drive Bays
Capacity 5 x SATA-I, II or SAS Hot-swap HDDs
Cooling Subsystem 1 x 80mm (T32mm) Exhaust Fan
System Monitoring
z Fan Fail Detection LED and Alarm
z Overheat LED and Alarm
z HDD Failure LED and Alarm
Front Access Two USB ports on the front panel
Dimensions (WxHxD)
146 x 127.3 x 218.2 (mm)
5.75 x 5.01 x 8.59 (inch)
Weight (Fan included) 2.2 kg
Compatible CHENBRO Chassis
z RM31300 / RM41100 / RM41500 / RM42200
z SR105 / SR107 / SR108 / SR209