Daymak Eagle - Manual (Page 3)

★Instrument and indicators
No. Description Function
1
Head lamp light
variation indicator Indicate status of head lamp
2 speedometer Indicate current speed of vehicle
3 odometer Indicate accumulated mileage of vehicle
4 Turning signal lamp Blink when vehicle is turning
5 Charger indicator Show working condition of charger
6 coulometer Show power level of battery
2. Essentials of safety riding：
★Check the vehicle before riding, so as to avoid accident. The main checking items are: abundance of electric
power, reliability of steering and braking device, normality of tyre pressure, normality of all appliance signal
and other indicators.
★As to avoid other harms to motorized vehicle, the drivers should follow the following instructions:
a. wear bright garments；
b. do not ride too close to other vehicles；
c. obey transport regulations, do not race for traffic；
d. turn on turning lamps when turning, to make somebody’s attention；
e. exercise caution at crossovers and entrances to parking areas；
f. do not ride by single hand；
g. do not carry extra people or stuff；
h. on rainy days, keep a safe distance between vehicles and brake in advance.
★Garment protection
a. Driver should wear helmet, eyeglasses and gloves；
b. do not wear loose garment so as to avoid stripping operating bar and pedestrian.
★Loading up
a. Do not load high-weighted stuff. Over-load will affect vehicle performance and would be dangerous.
b. Securely fix cargo on the vehicle to ensure a safe drive.
c. Do not hang anything on handlebars, so as not to affect normal driving.
★Do not flush the vehicle directly when cleaning, so as to avoid short circuiting by dampness.
3. Operating instructions & notice
★Starting up
a. Withdraw main kickstand or side kickstand；
b. Driver sits on seat, insert the key to electric lock cylinder, turn clockwise to ON position, so as to turn on
power；
c. Turn speed regulating handle towards inner side slowly, to make start-up.
Notice: When general electric lock is turned on and rear wheel is landed, the driver is not seated, do not turn
speed regulating handle preventing from abrupt forwarding of vehicle which will results in accidents easily.
★Speed shifting
Turn speed shifting bar towards inner side (counterclockwise), vehicle will accelerate; turn it towards outer side
(clockwise), the vehicle speed will be lowered.
Attention: Turn speed shifting bar slowly so as to ensure safety driving and reduce mechanical failure.
★Turning
a. Turn the switch on the turning lamp switch towards the desired direction, turning lamp start to blink;
b. Press the button after turning, the turning lamp went out.
Attention: Turn off turning lamp at once when the turn is over, so as to avoid confusion and accident.
★Braking
When tightening front and rear wheel braking bar, braking front & rear wheel respectively.
Attention: Though the vehicle has the feature of disconnection protection when braking(both front and rear
wheel), driver needs to build the habit of resetting the speed shifting bar so as to avoid overturn and side list.
★Parking
a. Turn off general power switch and air switch located below the seat prior to parking；
b. Lower the main kickstand and side stand to securely park the vehicle；