Daymak Eagle User Manual
Page 4
c. Turn the key counterclockwise to “OFF” position, to lock the fork lock prior taking out the key.
★Charge
a. Turn off general power switch;
b. Open the seat and take out stock charger, plug to output charging socket at the electric vehicle, and then to
power socket. The average charging would take 3 to 8 hours, and do not use the electric vehicle when it is
undercharged with electricity.
c. After charging, unplug and coil it, then put it back to the seat.
Attention: The charger is specified made by our company, do not use other charger. Try not to use quick charger
in case of shorten battery life.
d. Charging should proceed in condition of good ventilation not in the environment with corrosive gas or
inflammable condition.
e. If the battery need a long-time storage, should be store in full battery and be recharged every month.
f. Once found high temperature of battery when charging or abnormal in charging indicator, which indicating
malfunction in battery or charging circuit, should disconnect charging immediately and repair it by
professional.
g. Charge battery in time after each driving, which is good to battery life. Ambient temperature will greatly affect
battery, i.e. charged battery driving mileage will fall in winter or cold area, which is deemed normal; it will get
back to normal once temperature rises.
4. Electric vehicle’s check, maintenance and quick-fix
★Daily check & maintenance
a. Checking items of each drive:
① If turning lamp, braking lamp and horn are normal;
② Flexibility of steering mechanism;
③ Reliability of braking operation;
④ If any indicators are normal;
⑤ Eliminate the abnormality once it is found.
b. Regular checking items
① Reliability of all fastenings, screw it tight once found unsecured;
② Check tightness and breaking off of all cable connections, reconnect it once found;
③ Check tyre pressure. Charge them to 1.75/1.85 kg once found under pressured;
④ Check if tyre is broken or wore out, if groove depth is less than 2mm or appear chap or broken in appearance,
should replace the tyre immediately.
★Adjustment of front & rear brakes
① Free travel of front & rear braking bars is 10 to 20mm;
② Braking bar travel length should not exceed 3/4 of all travel length when front & rear brake is at the tightest.
Adjust the travel length by adjusting regulating nut, right screw to decrease, left screw to increase; try clasp
several times to ensure the requirement is met, otherwise readjust it. Ensure adjusting nut concave area
should embedded at cylindrical plane of braking arm cylindrical pin after adjustment. Front & rear wheels
should act freely if they’re within the range of free travel.
★Regular maintenance items and time table
To ensure safe driving and elongate vehicle’s life, maintain the vehicle to the following.
A check, adjust, clean (replace when necessary) L Lubrication C Clean
Item
Travel mileage(KM)
200
1000
3000
5000
8000
10000
12000
Motor bearing
A
C
C
Controller
A
A
Charger
A
A
Front & rear braking block
A
A
A
Wheel bearing
A
C
A
C
C
A
Front & rear shock absorber
A
A
Front fork bearing
A
A
Tyre
A
A
A
A
A
A
A
Main & Side kickstand
A
A
A
Lubrication of all position
L
L
L
L
All bolts and nuts
A
A
A
A
A
A
A