I-View SDCI-220 Indoor Speed dome - Manual (Page 15)

15
V. Menu System
Menu Operation
Setup Preset 57 + [PRESET] or Press [MENU] button of the Joystick controller to
enter the Main Menu. The [FAR] Button of keyboard is the button for confirmation.
1.)
The items with “←→ ” are the submenu (See diagram 1). The item with
flashing ”
←→”
2.)
The items without “←→” are for parameters setting. The item with flashing
first character means being selected.
Move [WIDE] button to up for change selection, move [TELE] button to down
for change selection. Press [FAR] button to enter the needed item. Now
“ icon ”will flash. In the item submenu, move the joystick down to change the
selection.
3.)
Press [FAR] button to confirm the changing. After confirmation, “:”of current
item will be flashing, which means the item was selected. Then move the
joystick down to change the parameters.
4.)
After modification, press [FAR] button to confirm, then ":" will stop flashing,
and the first character of the selected item will be flashing again, means that the
modification finished and exit available.
5.)
<RETURN> is available for each menu page. Select it, and then press [FAR]
button to back to superior menu.
6.)
Select <EXIT>, and then press [FAR] button. The screen will show
<EXIT>WAIT, few seconds later, the menu will be closed, and the dome exits
the programming menu