I-View EC-2MIPN 2-Megapixels Day/Night Box IP Camera - Manual (Page 19)

3-3 Setting IP camera for Witness Pro NVR software
Click “ Start “ >> “ All Programs” >> “Witness NVR32 Pro”, then select the “ Video
Parameters setup- ezSetup” accessory program to setup the parameters. You will see the
diagram as below
 Disable channel: This will disable the selected channel when enable this function.
 Install video codec: Install the video codec, if you connect IP camera at first time.
 Vendor & Model: Select the correct brand and model for the connected IP camera. You also
Fig A Fig B
19