I-View EC-5MIPN 5-Megapixels Day/Night Box IP Camera - Manual (Page 48)

48
Alarm output: Setup the name of alarm output; define the mode (NC or NO) and trigger period.
(0 ms: Continue trigger)
Alarm Trigger: You can setup the image motion
trigger and sensor alarm trigger from this section.
The detail process show as below:
Motion alarm:
Enable Motion detection function and you can setup the trigger schedule and
detection area. Click and drag the left button of Mouse to setup the detection and you also
can select the motion sensitivity. You can specify the linkage method (Such as Trigger alarm
output, move the PTZ camera preset position and notify via email) when an event occurs.