Lexibook RCD200TS - Manual (Page 17)

17
English
17
CD PROGRAMMED PLAY
Use the program function to preselect the order in which a sequence of tracks
will be played.
1. Slide the function selector to the CD position.
2. Press the PROG. button. “PROG” will be displayed on the LCD screen and
“01” will blink.
3. Use the F.FWD or REW buttons to select the first track to include in
the programmed sequence.
4. Press PROG. to confirm and store the track.
5. Repeat steps 3 and 4 to program the other desired tracks.
6. Press Play/Pause to begin playback. The tracks will be played in the
programmed order.
Note:
• To cancel the program function, press the Stop button twice, “PROG” will
disappear from the display.
• During program setting, press Stop or open the CD door to cancel the
setting.
2. When listening to a CD, press F.FWD to play the next track. Press REW
once to skip to the beginning of the track currently playing. Press the same
button twice or more to play the previous tracks.
3. To search forward or backward through the playing track, press and hold
the F.FWD or REW buttons to locate a specific musical passage. The
player will move forward or backward at high speed as long as the button is
pressed. Stop pressing the button to return to normal playback.
Note:
• If a disc is installed incorrectly, dirty or damaged, it will not play.
• As each track is played, the track number is shown on the display.
• To prevent damage to the disc, never open the CD door while the disc is
rotating. Wait for the disc to stop before opening the CD door. Never touch
the lens when the CD door is open.
• Do not use the carrying handle when playing CD. The product should only
be used on a steady surface.
Repeat mode
1. To repeat continuously a single track, press the Repeat button once while
in play mode. “REP1” will be displayed on the LCD screen.
2. To repeat all the tracks, press the Repeat button twice while in play mode.
“REP ALL” will be displayed on the LCD screen.
3. To cancel the repeat function, repeatedly press the Repeat button until
“REP1” or “REP ALL” disappears from the screen.