Lexibook MFB300 - Manual (Page 8)

8
English
BASIC FUNCTIONS
SLEEP GUARDIAN
1. Use the “ON/OFF” button located on the top of the battery compartment to turn on or turn off
the toy.
Note: The Yayé® giraffe will automatically go into power saving mode (sleep mode) after 30 seconds
of inactivity.
2. Press one of the five buttons on the back of the toy to activate light and sound effects, play lullabies
or record a message. Press the same button once again to stop the lightshow or the lullabies.
1. Use the selector switch located on the top of the battery compartment to turn on or turn
off (“OFF” position) the “Sleep Guardian” function or to select one of the 3 modes:
• Mode 1: Lightshow
• Mode 2: Music
• Mode 3: Lightshow and music
2. If the baby cries, the “Sleep Guardian” feature will start automatically for 1 minute approximately.
IMPORTANT NOTE: To activate the “Sleep Guardian” function, make sure to select one the
3 available modes.
Fun! Yayé® starts to vibrate when short tail is pulled!
Note: Each new recording will delete and replace the previous one. The recording maximum length
duration is 10 seconds.
“Lightshow” button: use this button to activate or deactivate the lightshow. The
lightshow will be switched on for 1 minute.
“Music” button: use this button to play one of the five lullabies available. Each lullaby
is approximately 1 minute long. Press and hold this button to play all the lullabies in
sequence. You can use the volume wheel on the battery compartment to adjust the
volume level.
“Magic” button: use this button to play a random funny sound effect.
“Record” button: press and hold this button and speak clearly near the toy to record a
message. Release the button when you have finished. Your message will be played
to confirm the recording.
“Play/Pause” button: press this button to play the recorded message. If you didn’t
record any message, pressing this button will play a pre-record sound effect.