Led and sounds, Fields of play, Installing the batteries – Lexibook GT4000 User Manual

Page 4

Advertising
background image

LED AND SOUNDS

The LED (these are vertical and horizontal rows of red lights) are lighting up and flashing in different pattern to indicate the
coordinates, hits or the winner, or to prompt you for an input.

This game uses numerous sound effects to comment to game play.

Together the LED and sound effect will guide you through the game.

FIELDS OF PLAY

OWN BATTLE AREA:

position your units here

ENEMY BATTLE AREA:

record the shots you have fired at the enemy here

WHITE PEGS:

to indicate unsuccessful shots

RED PEGS:

to indicate direct hits

BLACK PEGS:

to indicate unsuccessful shots IN SEA/GROUND, GROUND/SPACE BATTLE and the island in
TREASURE HUNT

YELLOW PEGS:

to indicate direct hits IN SEA/GROUND, GROUND/SPACE BATTLE and the treasure box in
TREASURE HUNT

INSTALLING THE BATTERIES

MIDWAY 2 operates on 4 LR6 (AA) alkaline batteries of 1.5V. You cannot use an AC mains adapter with this unit.

• Open the door of the battery compartment underneath the game.
• Insert the 4 LR6 alkaline batteries following the polarity directions as indicated on the battery compartment (see diagram).
• Close the battery compartment.
• Switch on the game.

Do not use rechargeable batteries. Do not recharge the batteries. Remove the game’s accumulators before recharging them.
Only charge the accumulators under adult supervision. Do not mix different types of batteries or accumulators, or new and
used batteries and accumulators. The batteries and accumulators are to be positioned according to their polarity. Used batteries
and accumulators should be removed from the toy. The battery or accumulator terminal points should not be short-circuited.
Do not throw batteries into a fire. Remove the batteries in the event of long periods of non-use.
When the sound becomes weak or the game no longer responds, consider changing the batteries.

3

GT4000 GB 31/01/04 10:44 Page 3

Advertising