MoTeC E816 - Manual (Page 14)

12 E8xx Diagnostic Information
Test Analogue Inputs
It is possible to view the current ‘live’ voltages on the expander’s analogue
inputs using a PC connected to the E8xx via an ADL. In Dash Manager select
the menu item ‘Online – Test – Analogue Inputs’. Then click on the tab
‘Expander Analog’. This is very useful for testing wiring and sensors, and even
determining which sensors are connected to which inputs.
Test Auxiliary Outputs
Similar to the ‘Test Analog Inputs’ function, this screen allows the Auxiliary
Outputs to be tested. In Dash Manager select the menu item ‘Online – Test –
Auxiliary Outputs’ then click on the tab ‘Expander Outputs’.
To test an output select the desired output from the list then enter a suitable
Duty Cycle and Frequency then click the Start button.