MoTeC Knock OKM - Manual

MoTeC
SKM and OKM User Manual
Contents
Introduction ................................................................................ 2
Getting Started ........................................................................... 4
Installation .................................................................................. 5
SKM ......................................................................................................... 5
OKM ......................................................................................................... 5
Configuration ............................................................................. 6
Knock Detection....................................................................................... 6
Knock Module Configuration ................................................................... 8
Operation .................................................................................. 23
Appendices .............................................................................. 24
Appendix 1 SKM Internal Dip Switch Settings ....................................... 24
Appendix 2 SKM Connector, Pin Out and Wiring .................................. 26
Appendix 3 SKM Tuning Loom #61114 ................................................. 27
Appendix 4 Gold Wave Settings ............................................................ 29
Appendix 5 Detonation Explained ......................................................... 31
ESD - Antistatic
All necessary antistatic precautions must be taken while handling circuit
boards.
Copyright
© 2008 – MoTeC Pty Ltd
The information in this document is subject to change without notice.
While every effort is taken to ensure correctness, no responsibility will be taken for the
consequences of any inaccuracies or omissions in this manual.
Version 1.0, 24 October 2008