Schreiber Chillers 1001acsfod - Manual (Page 16)

FAN MOTORS
AIR COOLED
SPECIFICATIONS:
H.P. 1/2 – 2 each.
VOLTAGE - 460/200/230 PHASE 3
HZ-50-60
RPM 1140
OVERLOAD - Automatic, Internal
FRAME - LA56
MTG - Rigid, Open Motor
CAT. NO.
Leeson - 115726
ROTATION:
Motor runs clockwise (CW) looking from top of units..
FAN BLADE:
18" x 23 0 CW – 2 each.
SAFETY:
Avoid personal injury or equipment damage by disconnecting
electrical power before working on the motor. Make sure the power
is off when checking each phase.
MAINTENANCE:
1.
There are no lubrication points, therefore, no lubrication is necessary.
2. Make sure the blade runs in the correct rotation.
3. Clean the outside of the fan motor as necessary.
DO NOT FORGET: THE POWER MUST BE OFF WHEN WORKING ON THIS UNIT.
YOU COULD BE INJURED.
14
1001AC