Schreiber Chillers 1500ACsf - Manual (Page 15)

FAN MOTORS
SPECIFICATIONS:
H.P. – 1 – 2 each.
VOLTAGE - 200/230/460/480 3 phase
HZ-50-60
RPM - 1725
OVERLOAD - Automatic, Internal
FRAME - LA56, ROT. CW or CCW as marked
MTG - Rigid, Open Motor
CAT. NO.: Leeson #114342
ROTATION:
Motor can run either direction, clockwise (CW) or counter clockwise
(CCW). Note the given direction on unit.
FAN BLADE:
24" x 23 o CW from the top of the unit. – 2 each.
SAFETY:
Avoid personal injury or equipment damage by disconnecting
electrical power before working on the motor. Make sure the power
is off when checking each phase.
MAINTENANCE:
1.
There are no lubrication points; therefore, no lubrication is necessary.
2. Make sure the blade runs in the correct rotation.
3. Clean the outside of the fan motor as necessary.
14
1500AC.doc