Schreiber Chillers 2500modify - Manual (Page 14)

2500AC
FAN MOTORS
SPECIFICATIONS:
H.P. 1 each – 3 per unit.
VOLTAGE - 460 3 phase
HZ-50-60
RPM 1725
OVERLOAD - Automatic, Internal
FRAME - LA56, ROT. CW from top of unit.
MTG - Rigid, Open Motor
CAT. NO. Leeson #111311
ROTATION: Motor can run either direction, clockwise (CW) or counter clockwise (CCW).
Note the given direction on unit. – We set at the above rotation.
FAN BLADE: 24" x 23
o CW OR CCW – 3 each.
SAFETY: Avoid personal injury or equipment damage by disconnecting electrical power
before working on the motor. Make sure the power is off when checking each phase.
MAINTENANCE:
1.
There are no lubrication points, therefore, no lubrication is necessary.
2. Make sure the blade runs in the correct rotation.
3. Clean the outside of the fan motor as necessary.
14