Schreiber Chillers 200ACsf - Manual (Page 7)

SETTING SOLID STATE CONTROLS
Now a Standard Feature on:
4
50,100,150,200,300,AND 400AC/WC Chillers
This unit has solid-state controls that regulate the temperature of the refrigeration
system. After the unit is wired to the proper voltage, the temperature can be set.
Setting the Temperature
Press and hold the button marked “display set point” as you turn the set point screw.
The temperature shown on the discharge temperature display will indicate the
temperature set point as you turn the set point screw. Press button marked “display
return” and the screen will now show return temperature.
Checking Temperature Set Points
To check the temperature set points, just press display set point for the compressor #1
set point, press display return for the compressor #2 set point,
Part Number: E128A
200AC