Castle TSM-11 User Manual
Page 11
Advertising
CASTLE, INC
TSM‐11 OWNERS MANUAL V1.4
Page 11 of 22
10.
Inspect each motor cord to verify that they are plugged into the duplex power outlet box
inside the machine and that they are clear of any moving parts. You may untie the main
machine power cord at this time. Verify the router bit is positioned at the center of the
cutout on the underside of the worktop. If it is not, refer to the Machine Adjustments
section “Pocket Hole Alignment” before proceeding. Place the machine on your
workbench right side up
Fig 15
Fig 14
Advertising