Adcom GTP-760 - Manual (Page 23)

40 Down arrow/Stop
•
In main mode, this is preprogrammed to scroll down to the next choice on a menu screen.
• In CD mode, it is preprogrammed to stop an ADCOM CD player.
• In tuner mode, it is preprogrammed to start scanning preset frequencies lower than the
current station.
• The button is programmable for use with any other source.
41 Select/Play
•
In main mode, this is preprogrammed to enter a selection chosen via the menu system.
• In CD mode, it is preprogrammed to start an ADCOM CD player.
• The button is programmable for use with any other source.
42 Direct Access Keypad (buttons “1” through “10,” and “+10”)
•
In Tuner mode, buttons “1” through “7” are preprogrammed to access preset stations.
• In CD mode, buttons are preprogrammed as track access commands for the ADCOM CD player.
• The buttons are programmable for use with any other source.
43 Shift
•
In Tuner mode, button is preprogrammed to access presets 8 through 14 (“Shift” + “2” = preset
number 9, etc.)
•
In CD mode, button is preprogrammed as “call” command for ADCOM CD player.
• The button is programmable for use with any other source.
44 FM/AM
•
In Tuner mode, button is preprogrammed to switch between FM and AM bands.
• In CD mode, button is preprogrammed as “repeat” command for ADCOM CD player.
• The button is programmable for use with any other source.
45 Stereo
•
In Tuner mode, button will change playback from Stereo to Mono.
• In CD mode, button is preprogrammed as “program/memory” command for ADCOM CD player.
• The button is programmable for use with any other source.
• In main it will switch to 2 channel.
46 Srnd (surround)
•
In main mode, button is preprogrammed to step through GTP-760’s various operation modes.
• In CD mode, button is preprogrammed to initiate random play with ADCOM CD player.
• The button is programmable for use with any other source.
47 Enter
•
In tuner mode, button is preprogrammed to select “manual” or “seek” tuning modes.
• In CD mode, button is preprogrammed as “time” command for ADCOM CD player.
• The button is programmable for use with any other source.
48 d. (dynamic) range
•
In main mode, button is preprogrammed to adjust dynamic range of Dolby Digital encoded sources.
• In CD mode, button is preprogrammed to access disc 1 with ADCOM CD player.
• The button is programmable for use with any other source.
49 dialog
•
In main mode, button is preprogrammed to call up or cancel “dialog enhance” equalization.
• In CD mode, button is preprogrammed to begin and end “A-B” repeat with ADCOM CD player.
• The button is programmable for use with any other source.
22