Adcom GTP-760 - Manual (Page 24)

50 Level trim (Rear Up/Down, Center Up/Down, Sub Up/Down)
Rear Up
•
In main mode, button is preprogrammed to increase both rear speaker levels simultaneously.
• In CD mode, button is preprogrammed to access disc 2 with ADCOM disc player.
• The button is programmable for use with any other source.
Rear Down
•
In main mode, button is preprogrammed to decrease both rear speaker levels simultaneously.
• In CD mode, button is preprogrammed to clear “repeat” command with ADCOM disc player.
• The button is programmable for use with any other source.
Center Up
•
In main mode, button is preprogrammed to increase center channel speaker level.
• In CD mode, button is preprogrammed to access disc 3 with ADCOM disc player.
• The button is programmable for use with any other source.
Center Down
•
In main mode, button is preprogrammed to decrease center channel speaker level.
• The button is programmable for use with any other source.
Sub Up
•
In main mode, button is preprogrammed to increase subwoofer level.
• In CD mode, button is preprogrammed to access disc 4 with ADCOM disc player.
• The button is programmable for use with any other source.
Sub Down
•
In main mode, button is preprogrammed to decrease subwoofer level.
• The button is programmable for use with any other source.
51 Bal. chk (balance check)
•
In main mode, button is preprogrammed to initiate balance check procedure with test tone and
BALANCE CHECK menu screens.
• In CD mode, button is preprogrammed to access disc 5/Memory Clear with ADCOM disc player.
• The button is programmable for use with any other source.
52 Dim
•
In main and tuner modes, button is preprogrammed to dim GTP-760’s information display.
• The button is programmable for use with any other source.
53 M1, M2, M3, M4 (Macro keys)
M1
•
In main mode, button is preprogrammed to select Tape 2 input (not applicable to GTP-760.)
• The button is programmable for use with any other source.
M2
•
In main mode, button is preprogrammed to select Video 4 input (not applicable to GTP-760.)
• The button is programmable for use with any other source.
M3 and M4
•
These buttons are programmable for use with any source.
54 Room 2
•
In main mode, button is preprogrammed to turn Room 2 on, show Room 2 status and turn Room 2 off.
• The button is programmable for use with any other source.
55 Backlight
•
No programming capabilities. Button backlights all keys for eight (8) seconds when pressed.
56 Mute
•
In main, tuner, and CD modes, button is preprogrammed to mute outputs of device.
• The button is programmable for use with any other source.
57 Status LED
•
Lights in different colors and patterns during learning operations as descriped in the remote
programming section
23