J&M 4WS17 - Manual (Page 20)

19
h
eader
S
addle
m
ount
Install the Header Saddle Mount. First set the mount onto the left frame. Run the 5/8” x 6 1/2”
carriage bolt through the bottom of the saddle mount. Next place the washer followed by the
Header Saddle Mount Bolt End. Run the saddle mount bolt end through the end of the adjust-
able handle before attaching it to the carriage bolt.
Next install the Header Saddle Mount Top Bracket to the saddle mount. Attach the header posi-
tion gusset using (2) header top bracket pins. Fasten the bracket pins with (2) 3/4” cotter pins.
High Profile Header Mounts Regular Header Mounts