J&M 1326-22T - Manual (Page 5)

3
1326-22S GRAIN CART
SPECIFICATIONS
DIMENSIONS (Equipped with 76x50 Tires)
A) 1’-6” B) 21’-10” C) 8’-6” D) 25’-6” E) 34’-5” F) 14’-8”
G) 6’-4” H) 12’-2” I) 1’-5” J) 2’-1” K) 9’-6”/10’-0” L) 11’-9”
M) 11’-4”
Note: Specifications are subject to change without notice or obligation.
* Bushel capacities measured with #2 corn at 15% moisture (56 lb test wt.)
**Time varies with rpm and moisture content of grain.
GENERAL INFORMATION
TO THE OWNER:
The purpose of this manual is to assist you in operating and maintaining your grain cart in a safe manner.
Read it carefully. It furnishes information and instructions that will help you achieve years of dependable
performance and help maintain safe operating conditions. If this machine is used by an employee or is
loaned or rented, make certain that the operator(s), prior to operating:
1. Is instructed in safe and proper use.
2. Reviews and understands the manual(s) pertaining to this machine.
Throughout this manual, the term IMPORTANT is used to indicate that failure to observe can cause damage
to equipment. The terms CAUTION, WARNING and DANGER are used in conjunction with the Safety-
Alert Symbol, (a triangle with an exclamation mark), to indicate the degree of hazard for items of personal
safety. When you see this symbol, carefully read the message that follows and be alert to the possibility of
personal injury or death.
This Safety-Alert symbol indicates a hazard and means
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
Indicates an imminently hazardous situation that, if not avoided,
will result in death or serious injury.
Indicates a potentially hazardous situation that, if not avoided,
could result in death or serious injury, and includes hazards that
are exposed when guards are removed.
Indicates a potentially hazardous situation that, if not avoided, may
result in minor or moderate injury.
Indicates that failure to observe can cause damage to equipment.
Indicates helpful information.
SPECIFICATIONS
Capacity 1,325 bushels
Auger, one vertical 22” diameter
Wheels 44x32
Hubs 10 bolt
Spindles 6” diameter
Weight (approx.) 16,100#
PTO 1,000 rpm
Tire Size 76x50:00
Tongue Weight:
Empty 2,400 lbs
Loaded 4,800 lbs
Construction:
Hopper 12 GA Steel
Undercarriage 8” x 4” x 1/2” Tubing V-Truss
Axle 7” x 7” x 1/2” Tubing V-Truss
Unloading Time** 2.2 minutes (approx.)
DIMENSIONS (Equipped with 36” Wide Storm Tracker Tracks)
A) 1’-6” B) 12’-2” C) 8’-6” D) 25’-6” E) 34’-5” F) 14’-8”
G) 6’-4” H) 12’-2” I) 1’-5” J) 2’-1” K) 9’-0” L) 11’-9”
M) 11’-4” N) 12’-0”