Hunter 51062 42 Low Profile - Manual (Page 11)

www.HunterFan.com
1.888.830.1326
Switch Housing
Make sure the lower switch housing is securely attached to
the upper switch housing. Failure to properly secure all three
assembly screws could result in the light fixture falling.
Partially install two of the
switch housing screws found in
the bag. Connect the plugs
from the upper and lower switch
housings. Make sure to line up
the colored markings on the
plug connectors.
Connect the fan pull chain
pendant to the short chain
coming from the switch housing.
ON
Turn P
ow
er
Align the notches in the sides of
the lower switch housing with
the screws on the upper switch
housing. Twist the lower switch
housing clockwise to lock into
place. Install the third switch
housing screw. Tighten all three
screws securely.
M0047-01 • 11/26/12 • © Hunter Fan Company
11