Hunter 51062 42 Low Profile - Manual (Page 7)

www.HunterFan.com
1.888.830.1326
Wiring
Turn the splices upward and push them carefully back through the hanger bracket
into the outlet box. Spread the wires apart, with the grounded wires on one side of
the outlet box and the ungrounded wires on the other side of the outlet box. Refer to CAUTION c.1 on pg. 2
FR
OM
CEILING BRA
CK
ET
FR
OM CEILING
FR
OM CEILING
FRO
M FAN
Gr
een/Y
ello
w S
tripe
(gr
ounding)
Gr
een/Y
ello
w S
tripe
Green/Yellow Stripe
Note: To connect the wires,
hold the bare metal leads
together and place a wire
connector over them, then twist
clockwise until tight.
FROM FAN
Using orange wire
connectors from
the hardware bag,
connect the black wire
(ungrounded) from the
ceiling to the black and
the blue wires from the
fan. Connect the white
wire (grounded) from
the ceiling to the white
wire from the fan.
Using an orange wire
connector from
the hardware bag,
connect the 3 grounding
wires (green, green/
yellow stripe, or bare
copper) coming from the
ceiling, downrod, and
hanging bracket.
Black
(ungrounded)
White
(grounded)
Whit
e
Blue
Black
7
M0047-01 • 11/26/12 • © Hunter Fan Company