Hunter 59031 48 Fantasy Flyer - Manual (Page 13)

13
42813-01 • 11/27/13 Hunter Fan Company
Step 7-1
Step 7-3
7 • Assembling the Blades
7-1. Assemble the blades to the blade iron ring,
using the blade asembly screw.
7-2. Put the screws into the holes in t he blade, set
the blade on the blade iron ring and mount
with the nuts provided. (We have provided a
wrench to tighten the nuts).
7-3. In stall the blade iron ring to the motor, using
the blade Iron armature screws.
7-4. Slide the ring with the blades attached over
the switch housing, rotating the ring until it
clears the switch housing.
7-5. Mount the ring to the motor hub with the
four screws identified above.
Iron Blade Ring
Blade
Blade Iron Armature Screw
Blade
Assembly Screw
Hex Nut
Blade Iron
Armature Screw
Hex Nut
Wrench