Hunter 59031 48 Fantasy Flyer - Manual (Page 5)

5
42813-01 • 11/27/13 Hunter Fan Company
Step 2-1
Ceiling
Plate
Wood
Screws
Mounting
Isolator
Outlet
Box
2x4 Wood Brace
1/2”
CAUTION: Cover plate must be securely mounted, as it
supports the entire weight of the fan.
2-1. Drill two pilot holes, 9/64" diameter in the 2 x 4 brace at the
outermost holes in the outlet box.
2-2. Install the (3) Mounting Isolators into the top of the ceiling plate.
2-3. Thread the wire leads through the center hole in the ceiling plate
and attach the ceiling plate to the brace. Use (2) #10 x 3" wood
screws and washers for mounting.
2-4. Do not tighten screws at this time. Leave a 1/2" gap between the
ceiling plate and the ceiling for insertion of the airplane decal.
2 • Installing of the Ceiling Plate
Flat Washer
3” Wood Screw
Mounting Isolator