CEMB USA DWA 1000XLB - Manual (Page 32)

I 0645 33 GB
The steering function allows measuring the characteristic steering angles: caster, SAI, TOOT.
It consists of making several measurements with the wheels steered at different steering angles.
You can select from three steering modes:
FAST steering: recommended because it is fast to execute •
10° steering: there is no technical reasons to use this method but it is available because many operators •
are accostumed to use it. It is advisable to execute fast steering instead as it is faster
20° steering: necessary to measure the TOOT and when imposed by the vehicle manufacturer
•
Press the key corresponding to the desired steering mode.
: 10° steering see paragraph 7.2
: 20° steering see paragraph 7.2
: Fast steering see paragraph 7.1
7 - STEERING