CEMB USA K9 (A) - Manual

I 0615 - 1 GB
Instructions for use I
CONTENTS
1 - GENERAL 3
1.1 - GENERAL SAFETY REGULATIONS 3
1.1.1 - STANDARD SAFETY DEVICES 3
1.2 - FIELD OF APPLICATION 3
1.3 - OVERALL DIMENSIONS (STANDARD GUARD) 3
1.4 - TECHNICAL DATA 4
2 - HANDLING AND LIFTING 4
3 - STARTUP 4
3.1 - ANCHORING 4
3.2 - ELECTRICAL CONNECTION 5
3.3 - ADAPTER MOUNTING 5
3.4 - WHEEL GUARD ASSEMBLY AND ADJUSTMENT (OPTIONAL) 5
3.5 - WD SPACER 5
4 - CONTROLS AND COMPONENTS 5
4.1 - AUTOMATIC DISTANCE AND DIAMETER GAUGE 5
4.2 - KEYBOARD AND DISPLAY 6
4.2.1 - FUNCTION MENU MANAGEMENT 7
5 - INSTRUCTIONS FOR USE OF THE WHEEL BALANCER 8
5.1 - USING THE GAUGE INSTALLED ON THE MACHINE 8
5.1.1 - DATA SETTING 8
5.2 - AUTOMATIC PRESETTING 8
5.2.1 - STEEL OR ALUMINUM WHEEL RIMS. SPRUNG COUNTERWEIGHTS 8
5.2.1.1 - STATIC & COMBINED MODES 9
5.2.2 - RIMS WITH INTERNAL COUNTERWEIGHT 9
5.3 - MEASUREMENT RESULT 10
5.4 - RECALCULATION OF THE UNBALANCE VALUES 10
5.5 - EXACT POSITIONING OF THE ADHESIVE WEIGHT BY MEANS OF THE GAUGE
WITH CLIPS
11
5.6 - SPLIT FUNCTION (HIDDEN WEIGHT) 12
5.7 - OUT OF BALANCE OPTIMIZATION 13
5.8 - AUTOMATIC MINIMISATION OF STATIC UNBALANCE 14
6 - SET-UP 15
6.1 - AUTODIAGNOSTICS 15
6.2 - AUTOCALIBRATION 15
6.3 - MANUAL DIMENSION PRESETTING (use only in particular cases or for test) 16
6.3.1 - STEEL WHEEL RIMS (use for setting dimensions in AUTOCALIBRATION) 16
6.3.2 - ALUS RIMS 16
6.3.2.1 - ALUS VARIANT WITH INSIDE CLAMP WEIGHT 17
6.4 - AUTOMATIC GAUGES CALIBRATION 17
6.4.1 - RIM DISTANCE GAUGE 17
6.4.2 - DIAMETER GAUGE E40 MM 18
7 - ERRORS 19
7.1 - INCONSISTENT UNBALANCE READINGS 20
8 - ROUTINE MAINTENANCE 20
8.1 - REPLACING THE PROTECTION FUSES 20