CEMB USA K9 (A) - Manual (Page 4)

I 0615 - 4
2 2a
GB
1.4 - Technical data ►
Single-phase power supply 115 / 230 V - 50/60 Hz
Protection class IP 54
Max. power absorbed 0,8 Kw
Balancing speed < 100 min -1
Cycle time for average wheel (14 kg) 6-8 seconds
Max. resolution of measurement 1 gram
Position resolution ± 1.4 °
Average noise < 70dB (A)
Rim-machine distance 0 - 265 mm
Rim width setting range 1.5” - 20” or 40 - 510 mm
Diameter setting range 10” - 30” or 265 - 765 mm
2 - HANDLING AND LIFTING
NOTE: DO NOT LIFT THE WHEEL BALANCER USING OTHER GRIPS .
3 - STARTUP
3.1 - Anchoring
The machine can operate on any fl at non resilient fl oor.
Make sure that the machine rests solely on the three support points provided (Fig.2a).
NOTE: If possible, it is advisable to anchor to the fl oor using relative mounting feet (see fi g. 2a) in the
event of continual use with wheels weighing over 35 Kg.
►