CEMB USA K9 (A) User Manual
Page 10
![background image](/manuals/326186/10/background.png)
I 0615 - 10
7a
7b
GB
5.3 - Measurement result
►
Inside correction
Outside correction
After performing a balancing spin, the amounts of unbalance are shown on the digital readouts.
The illuminated LEDs 3 and 4 indicate the correct angular position of the wheel to mount the counterweights (12
o’clock).
If the unbalance is less than the threshold value selected,
is displayed instead of the unbalance value; with
the values below the threshold can be read, selected gram by gram.
Note : in the case of wheels with a diameter less than or equal to 13” and at temperature conditions near
0°, the wheel balancer automatically inserts a special measuring cycle composed of two
successive measurements. The accuracy of the unbalance values and the reliability of the wheel
balancer remain unchanged. This type of operation is reset each time the wheel balancer is started.
5.4 - Recalculation of the unbalance values
Press
after new setting of the measurement.
►