CEMB USA K9 (A) - Manual (Page 3)

I 0615 - 3
1
GB
1 - GENERAL
1.1 - General safety regulations
The wheel balancer may only be used by duly authorized and trained personnel.
The wheel balancer must not be used for purposes other than those described in the instruction manual.
The wheel balancer must not be modifi ed in any way except for those modifi cations made
explicitly by the manufacturer.
Do not remove the safety devices. Any work on the machine must be carried out by specialised personnel only.
Avoid using strong jets of compressed air for cleaning.
Use alcohol to clean plastic panels or shelves (AVOID LIQUIDS CONTAINING SOLVENTS).
Before starting the wheel balancing cycle, make sure that the wheel is securely locked on the fl ange.
The machine operator must not wear clothes with fl apping parts. Do not allow unauthorized personnel to approach
the wheel balancer when the cycle is running.
Avoid placing objects in the base which could impair the correct operation of the wheel balancing machine.
1.1.1 - Standard safety devices
Stop push button for stopping the wheel under emergency conditions.
The wheel guard is not compulsory since the balancing speed is less than 100 min
-1.
1.2 - Field of application
The machine is designed for balancing wheels of cars, light commercial vehicles or motorcycles weighing less than 75 kg.
It can be operated in a temperature range of 0° to + 45° C.
The following functions are provided: ALUS; SPLIT; Unbalance optimisation; Autodiagnostics; Autocalibration.
1.3 - Overall dimensions (standard guard)
►
►
►
►