CEMB USA K9 (A) - Manual (Page 11)

I 0615 - 11
8
GB
5.5 - Exact positioning of the adhesive weight by means of the gauge with clips
- Press the button if using the correction method with weights on the inside of the rim .
►
- Fit the correction weight in the specifi c gauge seat with the adhesive
part facing upwards
- bring the wheel into correct angular position for the plane to be
corrected.
- Pull the gauge further outwards.
- Return the gauge to the rest position.
INSIDE CORRECTION POSITION
OUTSIDE CORRECTION POSITION
- rotate the gauge until the correction weight adheres to the rim
- the fact that the weight application position is no longer vertical (Fig.
8) is automatically compensated
- to cancel this function, press button again.
N.B. : It is not possible to put automatically
the correction weight in the Fig.5 POS. B position;
always rotate the rim in Fig.5 POS.A upwards.