E40 mm – CEMB USA K9 (A) User Manual
Page 18
Advertising
![background image](/manuals/326186/18/background.png)
I 0615 - 18
40 mm
40 mm
GB
6.4.2 - Diameter gauge
E40 mm
►
Place the round part of the gauge terminal on the fl ange as shown
in the fi gure and press
.
- The number 289 ± 3° appears on the left display .
- Turn the gauge downward position the round part of the gauge
terminal at 40 mm (radial distance) from the fl ange as indicated
in the fi gure.
- The number 289 ± 3° should appear on the left display.
- If not, press the
button holding the gauge still at 40 mm:
the number 289 appears on the left display.
- Return the gauge to rest position.
In the event of incorrectly accessing the diameter gauge
calibration function, press
to cancel it.
Advertising