CEMB USA C68SE (B) - Manual (Page 24)

Visualisation excentri-
cité
I 0201 GB - 24
N.B.: If the fi rst harmonic value is higher than the limit indicated by setup parameters (see FIRST
HARMONIC LIMIT), at the end of the eccentricity measurement, the following window appears:
In this case, it is advisable to rotate the tyre on the rim by 180° in order to reduce the eccentricity
value measured.
For more detailed information, press pushbutton .
Eccentricity Display
CAUTION
Before balancing the wheel, it is advisable to rotate the
tyre on the rim by 180° in order to educe the eccentricity
measured.
CAUTION! The current eccentricity of 1.0 mm gives rise
to a force more or less equivalent to that generated by an
imbalance of 33.2 gr at a speed of 120 km/hour.