Asante Technologies 5212 - Manual (Page 107)

RMON Alarm Group
Page 7-9
RMON Alarm Group
The Alarm Group periodically takes statistical samples from
variables and compares them to previously configured
thresholds. The alarm table stores configuration entries,
each of which defines a polling period and various
threshold values.
▲
Important! The Alarm Group requires imple-
mentation of the Event Group. You must create
an Event Group entry before you can add an
Alarm Group entry. See "Adding an RMON
Event Group Entry" on page 7-16 for instruc-
tions.
To access the RMON Alarm Group menu, type a from the
RMON Parameter Menu. A screen similar to Figure 7-6
appears.
Figure 7-6 RMON Alarm Group Menu
book Page 9 Monday, March 2, 1998 4:27 PM