CEMB USA C75_2-L (B) - Manual (Page 28)

I 0522 - 28 GB
6 - Setup (see Diagram showing access to the menus)
The Setup screen provides the user with many possibilities required for presetting the machine according to his own
requirements. Such settings remain unaltered even when the machine is switched off.
The following buttons are enabled:
: return to previous window
: return to Measurement screen
from to : for selection of the parameter.
6.1 - Language
This function allows selecting the language to be used for displaying descriptive and diagnostic messages regarding
machine operation.
6.2 - Unit of unbalance measurement
It is possible to select whether to display the unbalance values expressed in grams or ounces.
6.3 - Tolerance (also see CORRECTION METHOD )
This is the unbalance threshold below which the word “OK” instead of the unbalance value appears on the screen at
the end of the spin:
The tolerance varies based on the correction method selected.
In the case of IC (Intelligent Correction), set the static tolerance limit and the average weight of a reference wheel of 6”
in width and 15” in diameter.
The following buttons are enabled:
parameter selection during setting
parameter decrease/increase during setting
default parameter setting recommended by the manufacturer
return to previous frame.