CEMB USA K10_2 (E) - Manual (Page 6)

I 0581 - 6
6
5
1 2
3 4
15 16 17
14
13
7
8 9 10 11 12
4
GB
4.2 - Control panel and display
1-2 Digital readouts, AMOUNT OF UNBALANCE,
inside/outside
3-4
Digital readouts, POSITION OF UNBALANCE,
inside/outside
5
Indicators, correction mode selected
6 Indicators, selection made
7 Push button, unbalance reading < 5 g (25 oz)
8 Push button, operator selection
9 Correction mode selection pushbutton
10 Push button, SPLIT (unbalance resolution)
11 Push button, FUNCTIONS MENU
12 Menu selection confi rmation pushbutton
13 Push button, cycle start
14 Push button, emergency/home
15 Push buttons, manual DISTANCE setting
16 Push buttons, manual DIAMETER setting
17 Push buttons, manual WIDTH setting
Note: Press buttons only with your fi ngers. Never use the counterweight pincers or other pointed
objects.
When the beep signal is enabled (see
FUNCTION MENU MANAGEMENT
), pressing of any
push button is accompanied by a “beep”.