CHIEF CM2C40 - Manual (Page 17)

Installation Instructions CM2C40
17
Extended Programming Capabilities
The CM2C40 allows for extended programming to make the
mount compatible with other devices such as a Universal
Remote or other control devices through a serial connection.
Setting or changing the configuration of the CM2C40 is done
through the remote control provided with the mount.
The remote control has a range of 20-30ft (6-9m), and is
powered by 2 AAA batteries that are accessed from the back of
the remote.
NOTE: If operation of the mount is required at a greater
distance than remote control will allow, the mount can
be controlled through a hardwired switch or similar
device. See Dry Contact Closures and (See figure
31) .
The following table and illustration identify mount functionality
and response by button on the remote control(s).
Normal Operating Mode
Figure 28
1 2
3
4
5
6
7
8
9
10 11
12 13
KEY FUNCTION REQUIRED ACTION
1 NOT USED N/A
2 NOT USED N/A
3 EXTEND DISPLAY PRESS
4 NOT USED N/A
5 STOP PRESS
6 NOT USED N/A
7 RETRACT DISPLAY PRESS
8 NOT USED N/A
9 NOT USED N/A
10 NOT USED N/A
11 NOT USED N/A
12 NOT USED N/A
13 NOT USED N/A