CHIEF TA410 - Manual (Page 6)

TA410 Installation Instructions
6
7. Hang display onto faceplate inserting two installed Phillips
machine screws (B) into upper mounting holes. (See Figure
4)
8. Secure adapter bracket to faceplate by installing two 5/16-
18 x 1/2" Phillips pan machine screws (B) through lower two
200 x 200mm mounting holes on faceplate and adapter
bracket. (See Figure 4)
9. Tighten all four screws (B) to fully secure adapter bracket
(A) to faceplate.
Figure 4
7
8 (B) x 2
(TS318TU shown)