AAON CN-140 - Manual (Page 17)

17
the flashings must be installed on each end
of the unit to complete the finished seal at
the base. The flashings are unit specific and
designed to cover the slot at each end of the
unit to prevent water run-off into the curb.
Failure to attach and seal the end of unit
with the flashings may result in water
leakage into the curb.
Figure 5 - CN Series A Cabinet Top Lifting Detail
Figure 6 - CN Series B and C Cabinet Bottom Lifting Detial
Lifting slot locations are unit specific.
Unit must be rigged at all marked lifting points.