Analog Way Eikos LE - Manual (Page 2)

Eikos LE - Ref. EKS400
Front Panel Description
OUTPUT #1 to #2: select the output #1 to #2, a layer
and a source, then press TAKE
MATRIX #1 & #2
DVI 1 to DVI 2: Press to access DVI #1 or DVI #2
SDI 1 to SDI 4: Press to access SDI #1 to SDI #4
BLACK: Change the active layer to Black
FREEZE: Freeze the input linked to the current layer on MAIN
Background Frame: Display or change Frame
Background Live/PIP1: Change active Layer
PIP2 to PIP3: Change active layer to a PIP
Logo1 to Logo2: Display or change Logo
PREVIEW: Toggle preview functionality
SHIFT: Secondary function selection button
FUNCTION
Transition the pre-selected sources onto the
MAIN output with the selected effects
EXIT/MENU: Home Menu or back one level
ENTER: Validates the menu or command
STAND-BY: Hold for 3 seconds for stand-by Mode
TAKE
DIgITAL INPUT Selection
LAYER LAYER SELECTION
CONTROL STAND-BY
Preset section: Stores and recalls 4 presets available
CUT: Select Cut as the current transition type
FADE: Select Fade as the current transition type
USER #1: Select User #1 as a customized transition
USER #2: Select User #2 as a customized transition
P#1-4: Select P #1 to #4 as a customized preset
EFFECT / PRESET
O U T P U T S E T U P
1 - Press the EXIT/MENU button from the Home menu [all functions must be
confirmed by the Enter button]
2 - Press [ Output]
3 - Press [ Output format]
4 - On Format line, select the display’s native resolution
5 - Control or adjust your display device (Monitor or Video Projector)
6 - If necessary, select [ Test Pattern] in the Output menu
#1-7 L / F #1 to #7: access source #1 to #7, Display Frame or Logo #1 to #7
#8 AL / F #8: access Source #8, Display Frame #8 or Logo #8 or Animated Logo
I N P U T S E T U P
1 - Press the EXIT/MENU button from the Home menu [all functions
must be confirmed by the Enter button]
2 - Press [ Input] and [Autoset ALL]
3 - If the acquisition is successful the source appears on Preview.
Please Toggle the Preview button to display the Mosaic Mode
4 - If the acquisition has failed, check all connections and perform a
manual setup
5 - For a comprehensive Input Setup, please refer to user’s Manual
6 - For a manual input setup, press the EXIT/MENU button:
a) Press [ Input],
b) Select the right input from Input #1 up to SDI #4, then
c) Select [ Type].
NOTE: To adjust input Size or Pos, use the [Layer] Menus.
To adjust Blanking, use the Auto-Centering or Blanking
adjustments in the Image menu.
B U T TO N C O L O R U S A G E
No light: #1 = Input not available on autolock
#2 = Frame or Logo not available
#3 = Layer not available
#4 = Button not available depending on the user mode
Solid red: #1 = Source, Layer or Window is on Main
#2 = Mosaic Preview enable
#3 = Freeze enable
Solid green: #1 = Source or Layer is on Preview
#2 = Function available for modification
#3 = Current output on Matrix Mode
Dim green: Button available for selection
Blinking red: Active Layer or Source for modification on Main
Blinking green: Active Layer or Source for modification on Preview
Dim red: Stand-by button
Solid orange: #1 = Shift button
#2 = Function available by Shift button
HOW TO USE THE MOSAIC PREVIEW FEATURE
To have a full vision of the aspects of your inputs two modes are available. When
the Mosaic Preview button is activated (Red light solid button):
-
One live source mode: select your Layer and the source you want to put on it.
The input selected will be automatically refreshed on your Mosaic Preview
Press a Layer button (Bkgnd Live, PIP1 or 2) --> Press the Live souce chosen
- Random live source mode: To have a random refreshment of all your inputs, select
a layer and put it to black. All sources will be automatically refreshed randomly.
Press a Layer button (Bkgnd Live, PIP1 or 2) --> Press the Black Button
ANALOg INPUT Selection