Analog Way Eikos LE - Manual (Page 3)

Eikos LE - Ref. EKS400
Rear Panel Description
VIDEO OUT
AUDIO OUTPUT
AUDIO INPUT
RS-232 communication port
on a DB9 female connector or
TCP/IP on RJ45 connector
Power supply: IEC/EN/UL/CSA
60950-1, internal, autoswitchable
Universal Analog Computer/TV/HDTV inputs
SD-SDI/HD-SDI inputs #1 to #4: female BNC
DVI inputs #1 & #2: female DVI-I (digital pins)
Outputs #1 (Main) & #2 (Preview): female
HD15, DVI-I (analog pins)
Connectors:
1x BNC-F: SD/HD-SDI (with audio embedded)
3x BNC-F: Y_Cb_Cr
1x Mini Din 4: S. Video
1x BNC-F: Composite video PAL/NTSC
Balanced or unbalanced mono/
stereo Output
(all Pin MCO mode connector)
IP-LAN connector
Balanced or unbalanced mono/stereo inputs
(all pin MCO male connectors)
O P E R AT I O N S O V E RV I E W
WORKING IN MIXER MODE
1-
Select an input .
2- On the preview screen, the input appears
3- Select an EFFECT (open/close)
4- Press TAKE to view the result on the Main screen
WORKING WITH PIPs IN MIXER MODE
1- Press the PIP2 button. On the preview screen, the PIP (layer) appears as a
color rectangle
2- Select an input. On the preview screen, the input appears in the layer rectangle
3- Adjust the PIP (layer) with ADJUSTMENT button (Pos & Size or Zoom by
Toggle function)
4- Select a transition (open/close) or an effect into Layer menu [Home menu]
5- Press TAKE to view the result on the main screen
6- To remove layer, press BLACK then TAKE
7- For another PIP setup, repeat from step #1
A U D I O C O N N E C T I O N S
MCO male connectors
Inputs #1 to #6: Balanced & unbalanced connection
Inputs DVI #1 to DVI #2: Balanced &unbalanced connection
Input (AUX): Balanced & unbalanced connection
Outputs #1 to #2: Balanced &unbalanced connection
H O M E M E N U
- MODE : select to choose which mode the Eikos LE will work in (Mixer or Matrix Mode).
- INPUT : select to configure the 12 individual input types and resolutions.
- MAIN OUT : in Mixer mode, select to set the output types and resolutions of the Main output.
- OUTPUT 1 : in Matrix mode, select to set the output types and resolutions of Output 1.
- PREVIEW OUT : in Mixer mode, select to set the output types and resolutions of the Preview output.
- OUTPUT 2 : in Matrix mode, select to set the output types and resolutions of Output 2.
- VIDEO OUT : select to configure Video output card settings.
- PRESET : select to store and use presets.
- IMAGE : select to change source image settings of an input.
- KEYING/TITLING : select to access keying and titling controls and parameters when video layer
is selected.
- LAYER : select to adjust layer size, position, border, transparency or transitions.
- LOGO/FRAME : select to store (record), use and manage logos and frames into the Eikos LE.
- AUDIO : select to access all audio input and output parameters.
- CONTROL : select to access device software information, LAN settings, reset factory settings,
amongst other user oriented functions (see next page).
- VIRTUAL T-Bar : select to access the Virtual T-Bar.