Analog Way Saphyr - Manual (Page 52)

52
8.2.4 Output selection settings
- HDCP DETECT: enable or not the HDCP detection on the output,
- CENTERING PIC: display the centering test pattern,
- TEST PATTERN: choose to display one of the available test pattern.
All changes have to be validated by pressing the ENTER button in order to be saved
NOTE: The output status can provide you all information about the output in real time. This feature is
particularly needed when HDCP is used with long cable to be sure that the communication is well
handled.
Video Out
The Video Out allows you the same settings as other outputs with some additional specific options:
- SHARPNESS: set up the sharpness on the video out image,
- FLICKER FILTER: apply a flicker filter on your video output to eliminate flickering,
- UNDER/OVERSCAN: enable or not the automatic video zoom overscan,
- ADJUST: adjust your video output in term of H/V position and size.
In Matrix mode, the menu “Connection Mode” appears. It allows you to choose recording Output #1 or
Output #2.
8.2.5 Preview features
The Preview output can display all adjustments before the TAKE.
All current layers for the Program are defined by a colorful frame on Preview. They are identified by a letter
and a number with the same color.
- Frame: Frx, with x of 1 to 8,
- Layer A: Axx, with xx of 1 to 10,
- Layer B: Bxx, with xx of 1 to 10,
- Layer C: Cxx, with xx of 1 to 10,
- Logo 1: L1x, with x of 1 to 8,
- Logo 2: L2x, with x of 1 to 8,
- Quick Frame.
Because the number of resources available is limited, the Preview displays only one live or still layer at a time.
The others are only identified by their colorful frame and their number.
8.2.6 Preview mode and OSD settings
The Preview output can display 7 fields on OSD.
To set up your Preview:
menu > OSD Settings > OSD Fields
- Field#1: Input,
- Field#2: Transparency,
- Field#3: Border,
- Field#4: Opening Effect,
- Field#5: Closing Effect,
- Field#6: Smooth Move,
- Field#7: Keying.
8.2.7 Preview Id
The function disables all the display of ID information in Preview mode. The colored frames and numbers
indicating your source selection on each layer are disabled. To set up your Preview Id:
menu > Control > Functions > Preview Id