Analog Way Saphyr - Manual (Page 68)

68
8.3.9 Working with Mirror modes
3. Copy & H.pos Flip mode: Output #2 will be exactly the same as output #1 except the fact that the selected
layer will have its H position flipped (standard Mirror mode).
OUTPUT #1 OUTPUT #1 OUTPUT #2 OUTPUT #2
NOTES:
• Remember to simplify the use of this feature, you need to manipulate Output #1. While in mirror mode,
Output #2 will follow.
• Every change on Output #2 will have an effect only on Output #2, but remember that if a change occurs on
Output #1 after that, Output #2 will update automatically to match output 1.
• Remember that the layer B is always displayed with the keying feature enabled.