Analog Way OPS200 - Manual (Page 51)

To configure audio settings of the OPS200 , plug all audio inputs into
the device, and click on the Audio tab of the RCS home page.
1/ Set the Main audio output level and delay (accessible only if Delay
Mode is set to Manual Adjust, see also the “Audio Configuration”
chapter), or click the Mute button to mute Main audio output.
2/ Repeat step 2 for the Prelist audio output.
3/ Individual source settings (level and balance) for each audio input
can be configured in the right hand section of the Audio tab.
Audio Configuration
49