Analog Way QuickMatriX - Manual (Page 49)

49
8.2.6 Working with layers functions
Settings available:
Settings Background live / PIP#1 PIP#2
Position YES YES
Size YES YES
Zoom YES YES
Opening effects YES YES
Closing effects YES YES
Smooth Move YES YES
The Program output can displayed simultaneously up to 3 layers stacked from bottom to top as follows:
- Layer A: one source selected from 8 inputs available,
- Quick Frame: one of the 8 frames available.
8.2.7 Layer adjustment menu
• To have access to the layer adjustment menu, a source has to be affected to your layer:
Press source #
• Once a source is attached to layer, you can have access to the layer adjustment menu:
Go into Layer menu
Press TAKE to view the result on the Program screen
8.2.8 Layers with transitions
All the transitions (Cut, Fade or Transitions) are available in the native Matrix mode. You will be able to per-
form powerful transition effects seamlessly. It can depend on your configuration.
The QuickMatriX has 4 scalers, to understand how your effect will be performed, you need to know how
many scalers are used on your outputs. Don’t forget that you always need one free scaler to perform seamless
transitions.
Example:
1 layer on each output > 2 scalers used > 2 seamless transitions
2 layers on each output > 4 scalers used > no seamless transition (ie: fade through black)
Transitions
All the settings are available in the Layer menu after pressing the selected layer.
To use it: Layer menu > Select the transition effect into the layer memory
The effect will be immediately attached to the selected layer (Preview).
- CUT: duration time can be set to delay the cut effect,
- FADE:
• Adjustable pre-timed fades or manual transition
with T-Bar,
• Fade between any input, computer or video,
• Adjustable cross-fading duration,
- WIPE:
A
B
B
A
B
A
Program
Preview
Program
Preview