Analog Way QuickMatriX - Manual (Page 53)

53
8.2.15 Working with Mirror modes
Using the Mirror mode: the mirror mode can be activated layer by layer thanks to the layers menu. Select the
chosen layer and go in the layer menu, then select the “Layer Copy Mode” menu. There are several mirror
positioning options:
1. No Copy: this mode is the standard Matrix mode, output #1 and #2 are independent.
2. Clone mode: Outputs #1 and #2 will be the same. All changes on output #1 will be affected to output #2.
Layers will have the same position and size.
OUTPUT #1 OUTPUT #2
OUTPUT #1 OUTPUT #1 OUTPUT #2 OUTPUT #2
3. Copy & H.pos Flip mode: Output #2 will be exactly the same as output #1 except the fact that the selected
layer will have its H position flipped (standard Mirror mode).
OUTPUT #1 OUTPUT #1 OUTPUT #2 OUTPUT #2
NOTES:
• Remember to simplify the use of this feature, you need to manipulate Output #1. While in mirror mode,
Output #2 will follow.
• Every change on Output #2 will have an effect only on Output #2, but remember that if a change occurs on
Output #1 after that, Output #2 will update automatically to match output 1.