BEI Sensors PHU9 Absolute Hollow Shaft Encoder - Manual (Page 32)

PROFIBUS USER MANUAL
32 Preliminary
BEI IDEACOD SAS
Espace Européen de l’Entreprise
9, rue de Copenhague
B.P. 70044 Schiltigheim
F 67013 Strasbourg Cedex
Tél : +33 (0)3 88 20 80 80
Fax : +33 (0)3 88 20 87 87
Mail :
[email protected]
Web : www.bei-ideacod.com
7.3 Selecting the encoder version
As described in chapter 3 the functionality of
the encoder depends on the selected
encoder version. After the “POSI+” encoder
has been added to the network the desired encoder version can be selected. For this, one
of the modules listed under POSI+ encoder has
to be dragged to Slot 1 in the displayed
configuration table of the encoder.