Datamax-O'Neil MF8I Installation Guide - Manual (Page 6)

4
Mounting Options
Datamax-O’Neil MF8i Installation Guide
5 Position the printer with adequate room to open the printer and for the paper to exit.
6 Place the printer near the power source (for more information, see Power Cable
Requirements on page 6).
7 If you are using a battery with the printer, ensure the battery will not fall out when it
is installed in the printer.
Mounting Guidelines
• Do not position the printer above, near, or relative to, the driver's position as to
interfere with normal driving operations.
• Position the printer so it is protected from environmental elements such as moisture,
tools, and boxes.
• Do not set, place, position, or put any object(s) on top of the printer, either when the
vehicle is moving, or when the vehicle is stationary.
• Mount the printer away from the driver's head to eliminate potential injury in the
event of an accident.
• Do not drill holes through the printer's body to permanently mount the printer.
• Mount the printer in a secure location so that the printer is not affected by the
vehicle's vibration and the printer's hardware will not come loose.
• Use existing mounting holes to mount the printer. Do not create new mounting holes
on the bracket.
• Paper and humidity effect the overall performance of the printer (results may vary).
11”
20” 8-12”