Datamax-O'Neil APEX Series Programmer’s Manual - Manual (Page 52)

46
Select Load Operating Mode ESC F M m CR
This command selects the load operating mode. Possible values for parameter m are ‘0’: Standard response or ‘1’ :
Response with diagnostics message (default).
Command
String
Command
Description
Printer Response
m =1
Printer Response
m =0
LED Status
Esc-‘D’-‘F’ Enable font
downloading
? ? Communication LED – Flashing Green
MCR/Printer Error LED –Steady Red
Esc-‘F’-‘I’ Display tables
I nformation
Display installed
Font tables info
(refer to Table 5)
‘1’: if command correct
‘0’: otherwise
Communication LED – Flashing Green
MCR/Printer Error LED –Steady Red
Esc-‘F’-‘S’-
<CR> or <LF>
Display font
download current
S ettings
Esc-‘F’-‘S’ m t k f ‘1’: if command correct
‘0’: otherwise
Communication LED – Flashing Green
MCR/Printer Error LED –Steady Red
Esc-‘F’-‘P’ – m -
t - k - f - <CR>
or <LF>
Set Font
Download
P arameter
Esc-‘F’-‘S’ m t k f ‘1’: if command correct
‘0’: otherwise
Communication LED – Flashing Green
MCR/Printer Error LED –Steady Red
Esc-‘F’-‘M’- m -
<CR> or <LF> To select Mode Esc-‘F’-‘S’ m t k f ‘1’: if command correct
‘0’: otherwise
Communication LED – Flashing Green
MCR/Printer Error LED –Steady Red
Esc-‘F’-‘K’- k -
<CR> or <LF>
To select font
column(K) value
Esc-‘F’-‘S’-m t k f ‘1’: if command correct
‘0’: otherwise
Communication LED - Flashing green
Esc-‘F’-‘F’- f -
<CR> or <LF>
To select font
row(F) value
Esc-‘F’-‘S’ m t k f ‘1’: if command correct
‘0’: otherwise
Communication LED - Flashing green
Esc-‘F’-‘L’ – t -
<CR> or <LF>
Select file type
**and start of font
download
Esc-‘F’-‘S’ m t k f ‘1’: if command correct
‘0’: otherwise
Communication LED - Flashing green
Send the .bdf file Send the File While File is transferring:
Communication LED - Flashing Green
When transfer is complete:
Communication LED - Flashing Green
Total number of characters transferred is
displayed
Esc-‘F’- ‘B’
<CR> or <LF>
To program or
burn font on flash
On burn process
Complete:
D!X
On burn process
Complete:
D!X
While the font is being burned in
FLASH
Communication LED – Flashing Green
MCR/Printer Error LED - Flashing Red
When Burning complete
Communication LED – Steady Green