Datamax-O'Neil I-Class RFID HF & UHF Option - Manual (Page 15)

13
STX KuE Erase RFID Tag (Alien only)
This command erases the tag by filling it with nulls ( 0x00 ).
Syntax:
<STX>KuEa<CR>
Where: a - The number of attempts to locate and erase the tag, 1-9.
STX KuL Lock RFID Tag (Alien only)
This command locks tag.
Syntax: <STX>KuLabb<CR>
a
- The number of attempts to locate and lock the tag, 1-9. Where:
bb - Two character Lock Code value, representing one byte.
STX KuB Read Data from Gen2 Tag Section
This command reads a specific block address of a Gen2 tag.
Syntax:
<STX>KuBaaabbb
Where: aaa - Block address number, where: 000 is kill/access section; 001
is EPC section; 002 is Tag ID; and, 003 is user memory.
bbb - Data offset in word length
Sample: <STX>KuB001002
This example reads the block address 1 at offset word 2, which is location of the EPC data.
STX KuF Send RFID Device Firmware Version
This command instructs the RFID device to return the firmware version.
Syntax:
<STX>KuF<CR>
Printer response: DEVICE VERSION: XXX.XXX.XXX[CR]