Datamax-O'Neil LP3 LABEL PRINTER User Guide - Manual (Page 17)

S
ETTING
U
P
Y
OUR
P
RINTER
14
Bluetooth and/or 802.11b Parameters
Your printer is configured with default factory settings. To
determine your printer's radio configuration, print a self-test
(For more information, see Printing a Self-Test on page 12 ). If
you have multiple printers, configure them specifically for use in
your environment.
For proper system operation, set the following parameters on
your printer and host computer:
802.11b Parameters
• ESS ID
• IP Address (if not DHCP)
• DHCP
• Sub Net Mask
• WEP Encryption
• Port
• Network Type
Bluetooth Parameters
• Device Name
• Authentication
• Bondable
• Discoverable
• Connectable
• Encryption
For information on setting parameters, see Configuring the
Printer on this page . Contact your network administrator to
verify the proper radio settings for your environment.
Configuring the Printer
The printer has many configurable settings. To configure or
upgrade firmware, download the latest Windows configuration
program at www.datamax-oneil.com.